HEIDENHAIN 548431-05, User Manual, Page: 288 / 722

Teach-in | Recessing cycles
5
288
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Cycle run:
1 Approach the workpiece from the
Start point on a paraxial path
2 Finish the first side and the contour area up to a position just
before the
End point contour X2
,
Z2
3 Move to the Start point X / End point contour Z2 on a paraxial
path
4 Finish the second side, then finish the remainder of the contour
valley
5 Return to the Start point on a paraxial path
6 Move to the
Tool change point
according to the setting in
G14