HEIDENHAIN 548431-05, User Manual, Page: 575 / 722

Tool and technology database | Tool editor mode of operation
8
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
575
Selecting the manual change system in the tool data
Defining the tool as a manual change tool in the tool data form:
Press the Editing soft key
On the third form page, select MTS1: Manual
change tool
Press the Save soft key
If you define a tool as a manual change system, in
the tool list the tool type field (tool symbol) is color-
highlighted.
With manual change tools you must not select a
HID
tool holder (empty field). The assignment between the
holder and the tool takes place via the turret assignment
list. A manual change system has to have been set up
on the corresponding turret pocket for this.
With multipoint tools, all cutting edges must be
assigned the same
MTS
input value.