HEIDENHAIN 548431-05, User Manual, Page: 153 / 722

Machine mode of operation | Program run submode
4
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
153
Additive compensation
The control manages 16 additive compensation values. You edit the
compensation values in
Program run submode and activate them
with
G149
in a smart.Turn program or in ICP finishing cycles.
Entering additive compensation:
Press the Tool/Add. correct. soft key
Press the Additive correct. soft key
Enter the number of the additive compensation
Enter the compensation values
Press the
Save soft key
The valid compensation values are displayed in
the input window and adopted
Reading additive compensation:
Press the Tool/Add. correct. soft key
Press the
Additive correct.
soft key
Enter the number of the additive compensation
Place the cursor in the next input field
The control displays the valid compensation
values
Deleting additive compensation:
Press the Tool/Add. correct. soft key
Press the Additive correct. soft key
Enter the number of the additive compensation
Press the
Delete soft key
Press the Delete soft key—the values of this
compensation are deleted
Alternative: Press the
Delete all soft key
All compensation values will be deleted
Entered values are added to the existing
compensation values and are immediately
effective in the display. The control moves in the
compensation direction by the compensation value in
the following traverse block
The compensation values are saved in an internal
table and are available in any program
Delete all additive compensation values when you
set up the machine again