HEIDENHAIN 548431-05, User Manual, Page: 232 / 722

Teach-in | Turning cycles
5
232
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
G47 : Safety clearance
Further information: "Safety clearance G47", Page 180
T
:
Tool number
– turret pocket number
G14 : Tool change point
Further information:
"Tool change point G14", Page 180
ID
:
ID no.
S : Cutting speed or Constant speed
F : Feed per revolution
BP
:
Interval time
– time span for interruption of the feed
The chip is broken by the (intermittent) interruption of the feed.
BF : Feed period – time interval until the next break
The chip is broken by the (intermittent) interruption of the feed.
A : Start angle (reference: Z axis; default: parallel to Z axis)
W
:
Depart.angle
(reference: Z axis; default: orthogonal to Z axis)
XA , ZA : Start point blank (definition of corner point of
workpiece blank contour – evaluation only if no workpiece blank
has been defined)
XA
,
ZA
not programmed: The workpiece blank contour is
calculated from the tool position and the ICP contour
XA , ZA programmed: Definition of the corner point of the
workpiece blank
MT : M after T : M function that is executed after the tool call T
MFS
:
M at beginning
:
M
function that is executed at the
beginning of the machining step
MFE : M at end : M function that is executed at the end of the
machining step
WP : No. of spindle – Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW : Angle in the B axis (machine-dependent)
CW
:
Reverse the tool
(machine-dependent)
HC : Shoe brake (machine-dependent)
DF
:
Miscellaneous function
(machine-dependent)
Type of machining for technology database access:
Roughing