HEIDENHAIN 548431-05, User Manual, Page: 14 / 722

Fundamentals | Software and features
14
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
New functions of software 54843x-02
In the
ICP editor
submode, the
Shift the datum
miscellaneous
function was introduced, see "Datum shift", Page 434
In ICP contours, fit dimensions and inside threads can now be
calculated using an input form, see "Fits and internal threads",
Page 429
In the
ICP editor submode, the miscellaneous functions
Duplicate in linear/Duplicate in circular series/Duplicate by mirroring
were introduced, see "Duplicating a contour section in linear
series", Page 435
The system time can be set using an input form, see "Displaying
operating times", Page 127
The parting cycle
G859
was expanded by the parameters
K
,
SD
and U , see "Cut off", Page 308
The ICP recess turning cycles allow defining an approach angle
and a departure angle, see "Radial ICP recess turning, finishing",
Page 299
With
TURN PLUS you can now also create programs for
machining on the counter spindle and for multipoint tools,
see the smart.Turn and DIN Programming User's Manual
It is also possible to select a milling
contour in
G797
Area milling,
see the smart.Turn and DIN Programming User's Manual
The parameter
Y was added to G720 ,
see the smart.Turn and DIN Programming User's Manual
The parameters
O
and
U
were added to
G860
,
see the smart.Turn and DIN Programming User's Manual