HEIDENHAIN 548431-05, User Manual, Page: 626 / 722

Organization mode of operation | Parameters
9
626
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Further global technology parameters
Global technology parameters
Parameter Meaning
G14 for new units Default setting for the axis
sequence (start unit:
GWW
parameter) that is used to
approach the tool change
position:
No axis
0: Simultaneously
1: First X, then Z
2: First Z, then X
3: Only X
4: Only Z
5: Only Y
6: Simultaneous w/ Y
Coolant for new units Default setting for the coolant
(start unit:
CLT parameter):
0: Without coolant
1: Coolant circuit 1 on
2: Coolant circuit 2 on
Rotational direction for new
units
Default for the spindle direc-
tion of rotation
MD when creat-
ing or opening a new unit (
Tool
tab)
Conversion of the ICP contours Type of conversion for the ICP
contours
0: The calculated
parameters are output
1: The programmed
parameters are output
Global parameters for finished parts
Global parameters for finished parts
Parameter Meaning
Max. inward copying angle EKW Tolerance angle for recess
areas, used for distinguishing
turning from recessing (mtw =
contour angle):
EKW > mtw : Relief turn
EKW <= mtw : Undefined
recess (no form element)