HEIDENHAIN 548431-05, User Manual, Page: 524 / 722

ICP programming | Contours in the YZ plane
6
524
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Single surface in YZ plane
This function defines a surface in the YZ plane.
Reference data of YZ plane:
ID
:
Contour
C : Spindle angle
XR
:
Reference diameter
Parameters of single surface:
Z
:
Reference edge
Ki : Depth
K
:
Residual depth
B : Breadth (reference: Reference dimension ZR )
B < 0: Surface in negative Z direction
B
> 0: Surface in positive Z direction
You can switch between Depth Ki and Residual depth K by soft
key.
You can use the
Select reference plane function to determine the
Reference diameter XR .
Further information: "Reference data and nested contours",
Page 472
ICP generates the following:
The
SURFACE Y
section code with the
Reference diameter
and Spindle angle parameters. The section code is omitted for
nested contours.
a
G308 with the Contour name parameter
A G386 with the parameters of the single surface
A G309
Soft key
Switch the field to the input of
Residual
depth K