HEIDENHAIN 548431-05, User Manual, Page: 518 / 722

ICP programming | Contours in the YZ plane
6
518
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Polygon in YZ plane
Reference data of YZ plane:
ID : Contour
PT : Milling depth
C
:
Spindle angle
XR : Reference diameter
Parameters of figure:
YM , ZM : Center
A
:
Position angle
Q : Number of corners
K : Width across – inscribed circle diameter
Ki : Edge length
BR : Cham. width or Rounding radius
You can use the
Select reference plane
function to determine the
Reference diameter XR .
Further information: "Reference data and nested contours",
Page 472
ICP generates the following:
The
SURFACE Y
section code with the
Reference diameter
and Spindle angle parameters. The section code is omitted for
nested contours.
A
G308
with the
Contour name
and
Milling depth
parameters
A G387 with the parameters of the figure
A G309