HEIDENHAIN 548431-05, User Manual, Page: 689 / 722

Tables and overviews | Technical information
10
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
689
User functions
Programming – teach-in (optional) Turning cycles for simple and complex contours,
and contours described with ICP
Contour-parallel turning cycles
Recessing cycles for simple or complex contours,
as well as contours defined with ICP
Repetitions with recessing cycles
Recess turning cycles for simple and complex
contours, and contours described with ICP
Undercut and parting cycles (optional)
Engraving cycles
Threading cycles for single or multi-start
longitudinal, taper or API threads
Cycles for axial and radial drilling, pecking and
tapping operations with the C axis
Thread milling with the C axis
Axial and radial milling cycles for slots, figures,
single surfaces and polygons as well as for
complex contours defined with ICP for machining
with the C axis
Helical slot milling with the C axis
Linear and circular patterns for drilling and milling
operations with the C axis
Context-sensitive help graphics
Transfer of cutting values from technology database
Use of DIN macros in the Teach-in program
Conversion of Teach-in programs to smart.Turn
programs
Interactive Contour Programming (ICP) (optional) Contour definition with linear and circular contour
elements
Immediate display of entered contour elements
Calculation of missing coordinates, points of
intersection, etc.
Graphic display of all solutions for selection by the
user if more than one solution is possible
Chamfers, rounding arcs and undercuts available as
form elements
Input of form elements immediately during contour
creation or by superimposition later
Changes to existing contours can be programmed
Programming of the rear face for full-surface
machining with the C and Y axes
C-axis machining on face and lateral surface Description of individual holes and hole patterns
Description of figures and figure patterns for milling
operations
Creation of freely definable milling contours