HEIDENHAIN 548431-05, User Manual, Page: 384 / 722

Teach-in | Milling cycles
5
384
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
G14 : Tool change point
Further information: "Tool change point G14", Page 180
ID
:
ID no.
S : Cutting speed or Constant speed
F
:
Feed per revolution
I : Contour-parallel oversize
K : Infeed-direction oversize
X2
:
Limit diameter
P : Feed depth (default: total depth of one infeed)
FZ : Approach feed (default: active feed rate)
E
:
Reduced feed
for circular elements (default: active feed rate)
U : Overlap factor – defines the overlap of milling paths (default:
0.5) (range: 0 to 0.99)
Overlap =
U
* milling diameter
O : Roughing/Finish
0: Roughing
1: Finishing
H : Mill cutting direction
0: Up-cut
1: Climb
J : Mill direction
SCI
:
Safety clearance
in the working plane
SCK : Safety clearance in infeed direction
Further information:
"Safety clearances SCI and SCK",
Page 180
MT
:
M after T
:
M
function that is executed after the tool call
T
MFS : M at beginning : M function that is executed at the
beginning of the machining step
MFE : M at end : M function that is executed at the end of the
machining step
WP
:
No. of spindle
– Displays which workpiece spindle is used
to execute the cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining
BW
:
Angle in the B axis
(machine-dependent)
CW : Reverse the tool (machine-dependent)
HC : Shoe brake (machine-dependent)
DF
:
Miscellaneous function
(machine-dependent)
Type of machining for technology database access:
Milling