Hardy Process Solutions HI 6500 Series, User Manual

Page: 106 / 202

96
Chapter 5
•
•
•
•
•
•
Mode Parameter
The mode parameter selects between the single unit mode and multiple unit mode. If you
have multiple units hooked up to the display and disable split screen mode, you will get data
from only one of the units.
On the Web page
, this parameter is not configurable via the web interface.
On the HI 6500 series instrument display
, select the display menu and use the UP or
DOWN button to select the Split Screen submenu, then select the Mode menu. The current
mode will be displayed, press the ENTER or the RIGHT button if the mode needs to be
modified.
Num Display Parameter
The Num Display parameter sets the number of displays to be shown in the split screen
mode. If a number less than four is selected, any display segments above the Num Display
value will be blanked (set to the background color)
On the Web page
, this parameter is not configurable via the web interface.
On the HI 6500 series instrument display
, select the display menu and use the UP or
DOWN button to select the Split Screen submenu, then select the Num Display menu item.
The current Num Display value will be displayed, press the ENTER or the RIGHT button
if this value needs to be modified.
Discover Command
This command starts the automatic HI 6500 series instrument network discovery of up to
four instruments. Once discovered, the instruments would be available for display in the
split screen mode.
On the Web page
, this parameter is not configurable via the web interface.
On the HI 6500 series instrument display
, select the Display menu and use the UP
or DOWN button to select the Split Screen submenu, then select the Discover menu
item then press the ENTER button.
Filter Parameter Menu
There are two parameters in the Filter menu
•
NumAverages (Number of Averages)
•
WAVERSAVER
Only the HI 6500-XP and the HI 6510-XP units have additional options for
WAV, Motion Threshold and Variation Threshold.
NumAverages Parameter
The value you enter for NumAverages (the Number of Averages) sets the number of weight
readings used to compute a sliding average of displayed weight. This helps reduce the
effects of material impact and/or vibration if material does not enter or exit the scale evenly.
This setting helps the instrument ignore the effects of material impact and/or vibration.