Hardy Process Solutions HI 6500 Series, User Manual

Page: 186 / 202

176
Chapter 9
•
•
•
•
•
•
•
Raw variation for each load cell and the junction box ref weight.
•
WAVERSAVER® variation for each load cell and the junction box ref weight.
•
Raw variation results (pass/fail) for each load cell and junction box ref weight.
•
WAVERSAVER® variation results (pass/fail) for each load cell and junction box ref
weight.
•
The Return to Zero (RTZ) results (pass/fail) for each load cell and ref weight as well as
the combined reading.
To run the test users need to know the parameter ID (a 32 bit hex value) for the two
commands, Do IT Cmd and Do IT Reduced (voltage) Cmd.
These parameter IDs are:
0x3197 Do IT Test Cmd
0x3198 Do IT Reduced Cmd
To run the test, the user would set these parameters to a value of 1. Once the Test has been
run, the user can read each parameter ID they wish for the return value of that parameter.
The data will remain in the unit until the next time the IT test is run, which then would
overwrite the previous data with new data.
The parameter IDs are:
•
0x3197 Do IT Test Cmd
•
0x3198 Do IT Reduced Cmd
NOTE The number of sensors reported is from a list and will show 1 less than the user's input for
the number of sensors for the selected jbox.
0x498DJBOX 1 NUMBER SENSORS
0x498EJBOX 2 NUMBER SENSORS
0x4990 WEIGHT CHAN0
0x4991WEIGHT CHAN1
0x4992WEIGHT CHAN2
0x4993WEIGHT CHAN3
0x4998WEIGHT JBOX REF1
0x4994WEIGHT CHAN4
0x4995WEIGHT CHAN5
0x4996WEIGHT CHAN6
0x4997WEIGHT CHAN7
0x4999WEIGHT JBOX REF2
0x49A0MV/V CHAN0