Hardy Process Solutions HI 6500 Series, User Manual

Page: 76 / 202

66
Chapter 5
•
•
•
•
•
•
Using the Mode, Zero, and Tare buttons
The HI 6500 series instrument weight processor display shows the weight in Gross or
Net mode. Use the
MODE
button to change from displaying Gross weights to
displaying Net weights.
To Tare the Scale, press the
TARE
button. If the Tare is successful, you will get a message:
“Tare OK.” If the Tare is unsuccessful, you will get a message “Tare Failed.” Check the
Motion Tolerance parameter. Chapter 4 provides configuration instructions for the Motion
Tolerance Parameter.
To Zero the Scale, press the ZERO button. If the Zero is successful you will get a message:
“Zero OK.” If the Zero is unsuccessful, you will get a “Zero Failed” message. Check the
Zero Tolerance parameter. Instructions for setting the Zero Tolerance parameter value is
provided in Chapter 4.
The CONFIG Menu Structure
To configure and setup the HI 6500 series instrument press the CONFIG button. To enable
you to continue to monitor the weighing process, the display for the the weight, mode, and
zero symbol are reduced in size and placed in the top right hand corner.
A submenu list is provided on the left hand side, with the current item that you have
selected highlighted and identified by the
♦ symbol.
The numeric or alphanumeric value for the selected item is displayed in the area shown as
----- Value -----
in the above illustration, along with help text for the item selected.
If more than five item are in the submenu list, use the UP/DOWN button to scroll through
the submenu list. To select the item from the submenu list press the RIGHT or ENTER key.