Hanwha HCR-5 User Manual Download Page 187

Page: 187 / 206

Chapter 15 Maintenance

187

Select the file path to export.



Press the refresh button to update the storage list and the file list.

Press the filename input field and enter the filename.



Filename is limited to 25 letters, and empty character is not allowed.

Press the

Export

button.

When the confirmation window appears, press

YES

Importing the configurations

Select the file path for importing.



Press the refresh button to update the storage list and the file list.

Press the

Import

button.

Select the configuration items to import and press the

button.



You can select multiple items.



If you want to deselect it, press it again.

Summary of Contents for HCR-5















































































































































































































Search results

Summary of Contents for HCR-5

Reviews:

Related manuals for HCR-5

Brands by name

Popular brands

Hanwha HCR-5, User Manual

Search results

Summary of Contents for HCR-5

Reviews:

Related manuals for HCR-5

Brands by name

Popular brands