MAN3184 - TITANUS PRO
•
SENS®
141
7.6 Filter
7.6.1 Installing the air filter type LF-AD-x
Figure 89:
Drill hole intervals for the holes in the bottom of the air filter housing
► Insert the aspiration pipe in the provided pipe connection of the bottom
part of the housing. Note that the aspiration pipe must not be glued
together with the pipe connection for service purposes or the
replacement of the device. Also observe the flow direction that is
specified on the rating plate on the bottom part of the housing.
► Mark the drill hole intervals on a wall.
► Drill the holes according to the size of the installation material.
► Tighten the four screws by hand. Ensure that the device is installed with
zero voltage.
► In case of strong temperature fluctuations, fix the aspiration pipe
immediately before the device so that the pipe does not detach itself
from the pipe connection as a result of length changes.
Summary of Contents for Ampac TITANUS PRO-SENS
Page 51: ...MAN3184 TITANUS PRO SENS 51 Figure 34 Pipe shapes...
Page 61: ...MAN3184 TITANUS PRO SENS 61 Figure 36 Example pipe project planning with pipe accessories...
Page 118: ...MAN3184 TITANUS PRO SENS 118 Figure 73 Drill hole intervals for bracket type MT 1 mm...
Page 135: ...MAN3184 TITANUS PRO SENS 135 Figure 84 Attaching the aspiration reducing film sheet...
