MAN3184 - TITANUS PRO
•
SENS®
116
6.6 Installation location
6.6.1 Installation
When choosing the installation location, make sure
that…
▪ …the displays are clearly visible.
▪ …it is not within the opening range of doors.
Screw the aspirating smoke detector either directly to a wall using the base
shell or install it using a special bracket (see chapters "Technical description"
and "Device brackets").
Figure 71:
Installing the TITANUS PRO·SENS®
Make sure that air outlet from the aspirating smoke detector is not
obstructed. Maintain a distance of at least 10 cm between the air outlet of
the TITANUS PRO·SENS® and surrounding components (e.g. wall
projection).
The TITANUS PRO·SENS® can be installed with the air inlet pointing up or
down. Rotate the cover accordingly by 180°.
The reset circuit board can only be fitted at the above-described position
due to its height.
NOTICE
Summary of Contents for Ampac TITANUS PRO-SENS
Page 51: ...MAN3184 TITANUS PRO SENS 51 Figure 34 Pipe shapes...
Page 61: ...MAN3184 TITANUS PRO SENS 61 Figure 36 Example pipe project planning with pipe accessories...
Page 118: ...MAN3184 TITANUS PRO SENS 118 Figure 73 Drill hole intervals for bracket type MT 1 mm...
Page 135: ...MAN3184 TITANUS PRO SENS 135 Figure 84 Attaching the aspiration reducing film sheet...
