MAN3184 - TITANUS PRO
•
SENS®
32
3.3.5 Air filters for areas with excessive dirt
Figure 23:
TITANUS PRO·SENS® with air filter
In areas with disturbing ambient influences, e.g. dust, an air filter can be
used to protect the device's detector module.
Air filter type LF-AD-x
Air filter type LF-AD-x, consisting of a plastic housing with two pipe
connections, is used as a standard air filter. The filter material absorbs the
particles.
Type
Application
Examples
LF-AD-k
Coarse filter for separating
particles > approx. 30 µm
Insects, fibres, hair
LF-AD
Coarse filter for separating
particles > approx. 15 µm
Dust, insects, fibres,
hairs, cinders, pollen
LF-AD-1
Filter for separating
particles > approx. 10 µm
As above, additionally:
Colour pigments and fine dust
LF-AD-2
Fine filter for separating
particles > approx. 5 µm
As above, additionally: Fine dust
in lower concentrations
The air filter is automatically monitored for dirt (blockage) by the airflow
monitoring of the TITANUS PRO·SENS®. If air filters are soiled, the filter
inserts can simply be replaced after opening the filter housing.
Summary of Contents for Ampac TITANUS PRO-SENS
Page 51: ...MAN3184 TITANUS PRO SENS 51 Figure 34 Pipe shapes...
Page 61: ...MAN3184 TITANUS PRO SENS 61 Figure 36 Example pipe project planning with pipe accessories...
Page 118: ...MAN3184 TITANUS PRO SENS 118 Figure 73 Drill hole intervals for bracket type MT 1 mm...
Page 135: ...MAN3184 TITANUS PRO SENS 135 Figure 84 Attaching the aspiration reducing film sheet...