SOFTWARE MANUAL C32
Index n of reference values (in EEPROM)
kind of acc
ess (x, w, d, c)
n = 00d all reference values (reading only)
x
n = 01d head name
x, w, d
n = 02d serial number 1
x, w, d
n = 03d serial number 2
x, w, d
n = 04d weight of head module (g)
x, w, d
n = 05d head alignment
x, w, d, c
n = 06d actual average of dot resistance [Ohm]
x, w, d, c ( copy dot test, actually from param. 41,8)
n = 07d head push: platen force reference value [dN]
x, w, d
n = 08d poscount actuator1 reference value (HEADLIFT)
x, w, d
n = 09d poscount actuator2 reference value (HEADPUSH)
x, w, d
n = 10d poscount actuator3 reference value
x, w, d
n = 11d poscount actuator4 reference value
x, w, d
n = 12d ADC value AUX1 reference value
x, w, d, c
n = 13d ADC value AUX2 reference value
x, w, d, c
n = 14d ADC value AUX3 reference value
x, w, d, c
n = 15d ADC value AUX4 reference value
x, w, d, c
n = 16d ADC value AUX5 reference value
x, w, d, c
n = 17d ADC value AUX6 reference value
x, w, d, c
n = 18d ADC value AUX7 reference value
x, w, d, c
n = 19d ADC value VP reference value
x, w, d, c
n = 20d ADC value MotorTemp reference value
x, w, d, c
n = 21d ADC value HeadTemp reference value
x, w, d, c
n = 22d ADC value PaperEnd reference value
x, w, d, c
n = 23d ADC value NearPaperEnd reference value
x, w, d, c
n = 24d ADC value Vref reference value
x, w, d, c
n = 25d correction value 1
x, w, d
n = 26d correction value 2
x, w, d
n = 27d correction value A
x, w, d
n = 28d correction value B
x, w, d
n = 29d ADC battery temp
x, w, d, c
n = 30d correction value 3
x, w, d
n = 31d correction value C
x, w, d
n = 32d head temperature value
x, w, d
n = 33d head attachment offest
x, w, d, c
n = 34d motor temp high limit
x, w, d, c
n = 35d user serial number
(max. 32 bytes)
x, w, d (can be changed without expert mode)
n = 36d user string1
(max. 128 bytes)
x, w, d (can be changed without expert mode)
n = 37d user string2
(max. 128 bytes)
x, w, d (can be changed without expert mode)
n = 38d correction value U1_low
x, w, d
n = 39d correction value U2_low
x, w, d
n = 40d heater size width [dµm = 100 nm]
x, w, d
n = 41d heater size height [dµm = 100 nm]
x, w, d
n = 42d motor temp correction
x, w, d
n = 43d thermistor R25
x, w, d
n = 44d thermistor B value
x, w, d
n = 45d battery temp correction
x, w, d
n = 46d battery temp R25
x, w, d
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 59 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
