SOFTWARE MANUAL C32
20 FLG EMULATION
The following commands are emulated:
20.1 ROW/COLUMN COMMAND
<RC10,330>
This command positions the character in the sent row (R) and colum (C). A comma has to be sent between the values of
rows and columns. The above example means row 10 and column 330, the position where the characters start according
to their rotation.
The values are ASCII characters. This means that the number 10 is sent as ASCII 1 followed by ASCII 0,
not as a byte with the value of 10.
20.2 ROTATION COMMAND
This command sets the rotation mode for the following text until a new direction is sent. Facing the rotational direction,
all characters build up to the bottom and to the right of their original points.
<NR> No rotation
<RR> rotation right (+90)
<RU> rotation upside down (+180)
<RL> rotation left (+270 oder - 90)
20.3 COMMAND HEIGHT/WIDTH
<HW2,3>
This commands defines the height and width of a character. In the above example the height is set to 2 and the width is
set to 3. This means that in case of a dot size of 7x8 the character is 16 dots high and 21 dots wide.The size of characters
is only limited by the size of the ticket. Take care not to build characters into the ones below them. When the height and
width of characters have been changed from normal a <HW1,1> command is needed to return to normal size.
With loadable fonts HW is capped at a maximum of 4.
20.4 COMMAND FONT SIZE
<F1>
Font1 characters (5x7)
<F2>
Font2 characters (8x16)
<F3>
OCRB (17x31)
<F4>
OCRA (5x9)
<F6>
large OCRB (30x52)
<F7>
OCRA (15x29)
<F8>
Courier (20x40)(20x33)
<F9>
small OCRB (13x20)
<F10> Prestige (25x41)
<F11> Script (25x49)
<F12> Orator (46x91)
<F13> Courier (20x40)(20x42)
Fonts above F13 will work as well
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 145 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
