SOFTWARE MANUAL C32
8.4 MESSAGE ID
The message ID states the message source. It is built of two parts. The GMID which is the message releasing module and
the individual message code.
Example: 0x001D0000
GMID is 001Dh = 29 and thus coming from module message _C32
Message Code is 0000h which is a status messages
0:
0000h
GMID_NAUGHT
0000 MsgCode_NAUGHT__FATAL_ERROR
Fatal error, system reset necessary
0001 MsgCode_NAUGHT__SYSTEM_ERROR
System error, system reset
not
necessary
0002 MsgCode_NAUGHT__SYNTAX_ERROR
User error
1:
0001h
GMID_Debug
0000 MsgCode_Flash__ADDONSPARE
Storage space still available for AddOns
0001 MsgCode_Flash__ADDON
read AddOn
0002 MsgCode_Flash__NUMBER_OF_ADDONS
Read number of AddOns in the system
2:
0002h
GMID_Boot (only sent by the bootloader)
3:
0003h
GMID_PM
4:
0004h
GMID_SysParams
0000 SYSPUEEP_FAULT
EEPROM parameter damaged
0001 SYSPUEEP_FAULT_MISMATCH
EEPROM parameter damaged or EEPROM-
Parameter of a module is incomplete
((SysParams_FAULT_Data1Type) data word with
GMID of the concerned module and EEPROM
index.) Restored data are integrated into the
RAM.
0002 STARTUP_SYSP_OUT_OF_RANGE
At startup at least one system parameter was
out of the allowed range of values.
((SysParams_FAULT_Data1Type) Data word with
GMID of the concerned module). Value was
limited.
0003 SYSPFACT_FAULT_MISMATCH
Factory parameter damaged or incomplete.
((SysParams_FAULT_Data1Type) Data word with
GMID of the concerned module). Restored data
are integrated into the RAM.
0004 REQUEST_DENIED
System parameter request was denied.
0005 SYSPUEEP_PROG_DONE
Programming command for EEPROM parameter was ended.
Identifier:
0x00000000: EEPROM initialbit mask of concerned EEPROMs: Bit#0 = Main / Bit#1 = Head)
0x01000000: Erasing of system parameters (subsequently system parameter identifier)
0x02000000: Writing of system parameters (subsequently system parameter identifier)
6:
0006h
GMID_Flash
0000 ADDONSPARE
0001 ADDON
0002 NUMBER_OF_ADDONS
0003 MCU_SERIAL
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 41 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
