SOFTWARE MANUAL C32
8.10 READ OUT SYSTEM DATA WITH A8 COMMAND SYNTAX
Compatible with the A8 system, the following system data can be read out with the A8 command syntax:
<ESC> x <1d> <01d> <00d>
returns status byte 1
<ESC> x <1d> <01d> <01d>
returns status byte 2
<ESC> x <1d> <02d> <00d>
operation voltage
<ESC> x <1d> <02d> <01d>
print head temperature
<ESC> x <1d> <02d> <02d>
motor temperature
<ESC> x <1d> <02d> <04d>
distance sensor
<ESC> x <1d> <03d> <Param>
// factory settings
<ESC> x <1d> <04d> <Param>
// EEPROM parameter
<ESC> x <1d> <05d> <01d>
firmware string
<ESC> x <1d> <05d> <02d>
bootloader string
<ESC> x <1d> <05d> <03d>
serial number string
<ESC> x <1d> <06d> <Dummy>
number of existing fonts
<ESC> x <1d> <07d> <Font-Nr>
// font name
<ESC> x <1d> <08d> <Font-Nr>
// font height
<ESC> x <1d> <09d> <Font-Nr>
// font footer
<ESC> x <1d> <10d> <Font-Nr>
// font underlined underline
<ESC> x <1d> <11d> <Font-Nr>
// font width (must be 1)
<ESC> x <1d> <12d> <Dummy>
// position counter (in 2 bytes)
<ESC> x <1d> <13d> <Dummy>
// mark length (1 byte)
<ESC> x <1d> <14d> <Param>
// output RAM settings
<ESC> x <1d> <15d> <Wert>
output statistic values
0 operation time 1 minute
1 running length 3 cm
2 power on
3 cuts
4 head up
5 paper end
6 EOT
<ESC> x <1d> <16d> <00d>
output saved CRC
e.g.: „36601“
<ESC> x <1d> <16d> <01d>
//calculation of CRC e.g.: „36601“
Remarks:
•
Printing with <ESC> x <2d> n m is currently still stapled with BAUSTELLE_MSG_GEBE_A8_OUTPUT_PRINTER.
•
Parameters with comment "//" are not yet implemented or not possible.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 61 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
