SOFTWARE MANUAL C32
12.6.4.1 SELECT THE VERTICAL ALIGNMENTS
BARCODE COMMAND SEQUENCE
[Syntax]
<ESC> 'c' 0xFE + alignment preset (1 byte)
alignment preset, according to GeBE_A8 command ESC 'i':
0x00, '0', 'L', 'l':
left justified
0x01, '1', 'C', 'c': centered
0x02, '2', 'R', 'r': right justified
L (left justified): the object is positioned on the leftmost print area and possibly shifted to the right by
the indentation specified for the frame
C (centered):
the object is positioned in the middle of the print area
the indentation specified for the frame is not relevant
R (right-justified): the object is positioned on the rightmost print area and, if necessary, shifted to the
left by the indentation specified for the frame
[System parameter]
A8:
[15,20] RW_ASAP: default barcode alignment
N78:
[16,20] RW_ASAP: default barcode alignment
GA_46:
[56,20] RW_ASAP: default barcode alignment
12.6.4.2 SELECT ROTATION
BARCODE COMMAND SEQUENCE
[Syntax]
<ESC> 'c' 0xFD + rotation specification (1 byte)
0x00, '0', 'L', 'l':
left -> no rotation to the right
0x01, '1', 'T', 't': top -> rotate bottom by 90° (landscape)
0x02, '2', 'R', 'r':
right -> 180° rotation to the left
0x03, '3', 'B', 'b': down -> rotate top by 270° (lan rotation by 180°)
[System parameter]
A8:
[15,19] RW_ASAP: default barcode rotation
N78:
[16,19] RW_ASAP: default barcode rotation
GA_46:
[56,19] RW_ASAP: default barcode rotation
[Rotation value range]
0x00 to 0x01
according to GeBE_A8
(prepared for later extention 0x00 to 0x03)
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 103 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
