SOFTWARE MANUAL C32
18.2 UNICODE FONT (OPTIONALLY LOADABLE)
Alternatively also 16 bit fonts and unicode fonts can be processed.
In this case the kind of coding has to be indicated with:
Parameter 13,9
0: 8 bits
suitable for fonts up to max. 256 characters (e.g. ASCII or GeBE standard fonts)
1: 8.16 bits automatic switch, suitable for the GeBE font SimHei_GB23112_24x24_9
2: UTF 16 big endian suitable for fonts up to max. 65536 characters (e.g. GeBE font GE4769)
3: UTF 16 little endian suitable for fonts up to max. 65536 characters (e.g. GeBE font GE4770)
4: UTF 8 suitable for fonts up to max. 65536 characters (e.g. GeBE font GE4771)
If you select the 16 bit font with the command <ESC>"Pn" the printer automatically expects a 16 bit value to address the
desired character. However, if the first byte is smaller than 80Hex, only the first page is started without expecting any
further address byte. If you still want to use only 2 byte codings, the
parameter 13,7
has to be changed accordingly from
value 1 to value 0. To address the font in the 16 bit mode, the
parameter 13,7
must be set to "0". The font size can be
zoomed randomly.
Coding the unicode font is done with UTF8, UTF16BE, OR UTF16LE. To address the font the
parameter 13,9
has to be set
accordingly. Character size is 6pt. This represents a chinese character with 16x16 pixels. The font size can be zoomed
randomly.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 133 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
