SOFTWARE MANUAL C32
8.15 BARCODE SCANNER
This activates or deactivates the bar code scanner in a bar code scanner comprising system.
In module 48 the bar code scanner interface is configured.
[Name]
Activate/Deactivate Barcode Scanner
[Format]
ASCII
<RS>
“b“
"n"
Hex
1Eh
62h
"n"
Decimal
30d
98d
"n"
[Name]
The scanner is activated/deactivated.
n: "0"
Deactivate Barcode Scanner
n: "1"
Activate Barcode Scanner
n: "2"
Pulse Barcode Scanner – 10 ms
8.15.1 RESPONSE OF A BAR CODE SCANNER
[aR:0x00000032#[0x000295A0ms0x00300000:
0x000024D1
,
00030000567414
#w_+]#0xAF64B081:aR]
The bar code scanner
detected the value
00030000567414
at the position
0x000024D1.
The bar code scanning was terminated with a linefeed (0d hex).
8.15.1.1 CONFIGURE BAR CODE SCANNER
The command "configure bar code scanner" sends commands to the bar code scanner.
Bar code scanner command {MC01WT8} is send to the printer as: <ESC>b{MC01WT8}.
After a correct transfer of the command, the bar code scanner gives following feedback:
[AR:0x0000002C#[0x0000158Dms0x00300000: 0x00000000,
{MC01,OK}
#w_+]#0x6022771D:AR]
.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 72 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
