SOFTWARE MANUAL C32
5.2.1
EXAMPLES OF PRINTER PARAMETER PROGRAMMING
–
Writing RAM parameters of module 18 into EEPROM (user settings):
<RS>[5:18,0] <1Eh><5Bh> <35h><3Ah><31h><38h><2Ch><30h> <5Dh>
„5“
copy RAM parameter EEPROM-Parameter
→
„18“
module print
„0“
parameter index (complete list)
–
Changing density in RAM PrinterUserParams to value „30“:
<RS>[2:18,6:30] <1Eh><5Bh><31h><3Ah><31h><38h><2Ch><36h><3Ah><33h><30h><5Dh>
„2“
changing RAM parameters with subsequent activation
„18“
module print
„6“
parameter index Print_DENSITY
„30“
density value
–
Send EEPROM parameter of module 17 (renderer) to an active interface:
<RS>[12:18,10:0] <1Eh><5Bh><31h><32h><3Ah><31h><38h><2Ch><31h><30h><3Ah><30h><5Dh>
„12“
copy EEPROM parameter output
„17“
module Msg
„10“
stall timeout
„0“
output to interface
–
Example of a module 29 Msg_GeBE_C32 answer for parameter value 18,10:
[AR:0x0000002C#[0x004CE0C7ms
0x001D0001
:
(UEEP): 18,10: 2000
#i__
]#0x9624A77E:AR]
Answer: stall timeout time = 2000ms
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 31 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
