SOFTWARE MANUAL C32
5.1.2
PARAMETER INDEX A – TASK IDENTIFIER
0
change value of RAM parameter
1
change value of EEPROM parameter
USER SETTINGS
2
change value of RAM parameter and activate parameter
3
change value of EEPROM parameter and activate parameter
USER SETTINGS
4
delete one or all EEPROM parameter sets
5
copy RAM parameter
to EEPROM parameter
6
copy FACTORY parameter
to EEPROM parameter actually replaced by firmware parameter
7
copy FIRMWARE parameter
to EEPROM parameter
8
copy EEPROM parameter
to RAM parameter
9
copy FACTORY parameter
to RAM parameter actually replaced by firmware parameter
10
copy FIRMWARE parameter
to RAM parameter
11
send RAM parameter
to output
12
send EEPROM parameter
to output
13
send FACTORY parameter
to output actually replaced by firmware parameter
14
send FIRMWARE parameter
to output
15
send parameter help text
to output
16
send 11, 12, 13, 14, and 15
to output, performed subsequently
17
initialize external EEPROM
Figure 2: Overview Parameter Index
Attention:
When writing EEPROM parameters use the least possible amount of individual commands for write access. That means at first
change the EEPROM parameters for a module only in RAM and copy them subsequently en bloc to the EEPROM with the command
<RS>(5:<module no>,0). With the commands <RS>(1:...) and <RS>(3:...) only change individual system parameters.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 18 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
