SOFTWARE MANUAL C32
12.6 GRAPHICS COMMANDS
12.6.1 PRINTING FILED LOGO
[Name]
Print Logo number n
[Format]
ASCII
<ESC>
“#“
n
Hex
1Bh
23h
n
Decimal
27d
35d
n
[Description]
The filed AddOn Logo with the number n will be printed at actual cursor position. The left offset
can be set with the command <ESC>m<4d><Offset in mm>. The reference number of the logo can
be taken from the A8 logo patch chart.
12.6.2 GEBE GRAPHICS MODE
Concerning their data organization the graphics data of these modes correspond with the commands of the PCL
specification from version 3. They are compatible with the MS Windows compression procedure. Executing the
compressed data is almost as fast as mere bitmap printing. Because of the smaller amount of data to be transferred,
RS232 operation is much faster than the method without compression (about 1:3).
[Name]
Graphics mode - compressed
[Format]
ASCII <ESC> “m“
(Mode)
(Parm)
[Description]
Mode = 0: Graphics mode uncompressed
(without Parm)
Mode = 1: Graphics mode Run length
(without Parm)
Mode = 2: Graphics mode Tiff
(without Parm)
Mode = 3: Graphics mode Delta-Row
(without Parm)
Mode = 4: set graphics offset left:
Parm = 0: no left offset
Parm = 1: left offset (x8 in pixels)
Mode = 5: Erasing the Delta-Row-Line
(Seed Row/predecessor line)
(without Parm)
Mode = 6: Set graphics height
Parm = 0: Height = single
Parm = 1: Height = double …
Mode = 7 Ram Logo
Mode = 8 Color plane
Mode = 8 Color plane
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 99 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
