SOFTWARE MANUAL C32
11.4 TICKET DEFINITION
In order to define a ticket for the printer, all physical characteristics of the ticket and its desired behavior have to be
communicated to the printer. These settings are identical for all emulations.
11.4.1 CURSOR-URSPRUNG DES TICKETS FESTLEGEN
Parameter 14,3
C32:
define cursor origin of the ticket (in which corner the cursor is located).
By default, at a glance at the paper and printer, the cursor origin is "left front".
Parameter 20,3
= 1:
landscape mode. In FGL emulation the cursor origin is "right back"!
= 3:
this parameters allows as well the print image or the ticket to be turned by 180°.
This parameter is not active with line modes.
0: = portrait 0° (standard A8)
1: = landscape 90° (standard C32)
2: = portrait 180° (data mode)
3: = 270° (standard FGL)
11.4.2 TICKET MODE ON/OFF
Parameter 18,12
In ticket mode a ticket is always concluded with a FORM FEED or EoT. The printer finishes the ticket by searching a black
mark or completing the ticket to a specified length.
= 1
on
= 0
off
11.4.3 BLACKMARK DETECTION LENGTH
Parameter 18,13 Blackmark detection length in dotlines
: 0 = blackmark detection off.
Length for the detection of a mark in dotlines. This parameter is used to define how many dotlines must be recognized to
accept a blackmark as valid. Preset a low value, will quickly detect the blackmark. However here also other elements, such
as pre-printed text may be detected as blackmark. With default setting = 10 preprinted elements in the range of <1 mm
are ignored. A change of the value does not affect, for example, the ToF position. The value is automatically compensated.
If the setting is 0, the whole ticket length will be imprinted.
11.4.4 DEFINE ACTIVE BLACKMARK SENSOR
Parameter 18,14
0 = Paper End sensor
1 = AUX1 sensor
2 = AUX2 ……
default sensor in C32 mode = AUX 1
default sensor in FGL mode = AUX 2
If 0 = Paper end sensor is selected, the sensor must not halt on a blackmark. The paper end delay of
parameter 18,27
must be entered
sufficiently larger than the size of the blackmark.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 84 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
