SOFTWARE MANUAL C32
5 SYSTEM COMMANDS
5.1 SET PRINTER PARAMETERS
<RS>[a:m,x:w]
| | | | |
| | | | |
| | | | +-------- value (1…n characters)
| | | +------------ parameter index
| | +--------------- module
| +------------------ task
+---------------------- C32-command
Figure 1: Nomenclature System Commands
5.1.1
INFORMATION FOR COMMAND INPUT
–
Within the start and end identifyer for system parameter commands [ ], space characters (0x20) are tolerated
before and after the command parts a, m, x and w.
–
Input of new system parameter values:
–
Single elements of one array have to be separated by comma
–
Logical values as single ASCII characters
(FALSE: optionally '0', 'F', 'f', 'N', 'n' / TRUE: optionally '1', 'T', 't', 'Y', 'y', 'J', 'j')
–
Numerical values in decimal format (default) or alternatively as hexadecimal value or binary number with
prefix identifier '0x' resp. '0b'.
–
Command input
–
for 16-bit encodings: UTF8, UTF16 and 16Bit
–
since a 16-bit value is expected for 16-bit encodings for entering the command operator, the <ESC> or the
<RS> must be supplemented with 00hex. Then the parser continues to work for this command in 8-bit mode.
–
for the encodings: UTF8, UTF16 big endian - here a 00hex must be set before the <ESC>, <RS>.
example: set parameter 13.9 to 8 bits <0h> <RS> [2: 13.9: 0]
–
for the encodings: UTF16 little endian - here a 00hex must be set after the <ESC>, <RS>.
example: set parameter 13.9 to 8 bit <RS> <0h> [2: 13.9: 0]
–
with coding 1: = "8-16 bit automatic switching" this is not necessary
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 17 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
