SOFTWARE MANUAL C32
8.13 READ ANALOG VALUES
[Name]
Request analog values
[Format]
ASCII
<RS>
“x“
“a“
1d
n
Hex
1Eh
78h
61h
01h
n
Decimal
30d
120d
97d
01d
n
[Description]
The command issues the analog values of all 8 available analog channels.
Data are output as 16 bit values per AD channel.
ATTENTION: The AD converter resolution is only 12 bit.Therefore the upper 4 bits are always 0.
The output assigns indices in ADC order up to maximum available data.
Not available ADC indices will be output as 0x_ _ _ _.
n: ACD index
Description
Typical application
ADC Index 0:
all ADC values
(message with GMID 001D 0004)
ADC Index 1:
AUX 1
blackmark
ADC Index 2:
AUX 2
2. blackmark / head alignment
ADC Index 3:
AUX 3
n.c.
ADC Index 4:
AUX 4
n.c.
ADC Index 5:
AUX 5
motor temperature / pressure sensor
ADC Index 6:
AUX 6
n.c.
ADC Index 7:
AUX 7
additional Vp measurement / battery temperature
ADC Index 8:
Vp
ADC Index 9: Motor Temp
ADC Index 10: Head Temp
ADC Index 11: PaperEnd
ADC Index 12: NearPaperEnd
ADC Index 13: Vref
ADC Index 14: Battery Temp
ADC Index 15: Head Alignment
[Example]
read AUX 3 <RS>xa<1d><3d>
Response example of module 19 Print_Sensor, with message ID GMID 0x0013 and message code
0x000F: [aR:0x00000032#[0x00001242ms
0x00130003
:
0x0926
, #i +]#0xA229DD6F:aR]
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 67 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
