SOFTWARE MANUAL C32
14.1.4 FRAME ATTRIBUTE ORIENTATION (Rotation)
The rotation will be performed around the current cursor position and relates to the basic orientation of the printing area.
In case the cursor position equals the origin of the printing area, after the rotation the frame will be located almost entirely outside of
the printing area and will therefore be clipped!
[Command identifier]
FAttrRot (short term FAR)
[Parameter]
0 or multiple of 90 (negative algebraic sign allowed)
[Examples]
270° rotation clockwise of a frame FAttrRot270
equal to a 90° rotation counter-clockwise
[GeBE#FAR -90]
14.1.5 SPECIFY TEXT FRAME WIDTH AND HEIGHT
The length data refer to the coordinate system of the text frame. This means, that the position of the second corner
depends on the cursor position and also on the frame orientation (rotation against printing area).
[Command identifier]
FWH
[1. Parameter]
Width: integer
max. 32767
[2. Parameter]
Height: integer
max. 32767
[Example]
Frame size 70 dots wide and 30 dots high.
[GeBE#FWH 70:30]
14.2 FORMATTING COMMANDS FOR TEXT CHARACTERS
Commands for formatting text characters are effective for all subsequent text characters. Within the frames or even in a
row formatting may be changed several times.
14.2.1 FONT SELECTION
In case the selected font does not exist in the system, the actual selected font remains active.
[Command identifier]
F
[Parameter]
Sequential font number
[Example]
Select font number 2:
[GeBE#F2]
Select font number 8 with size 16 dots:
[GeBE#F8:16]
14.2.2 MANIPULATE THE FONT SIZE
Width and height of each character is defined in the font. If a different character size is required, without changing the
font, 2 different methods are available:
–
Setting the font size, that is, specifying the desired font height:
–
this method ensures that all characters regardless of the font have the same height, the width is automatically
scaled by the system so that the sign is not distorted. This setting is effective for each specified font.
–
Scaling of the character, that is, specifying a factor for width and height:
–
This method makes it possible to resize width and height independent of each other. The character will be
distorted. This setting works for all fonts globally.
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 113 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
