SOFTWARE MANUAL C32
12.7 ENDING A TICKET WITH THE "END OF TICKET" COMMAN
D
First a ticket is ended with a form-feed command. Considering
parameter 19
the printer is positioned to the reference
mark of the new ticket. The command "End of ticket" can indicate the method of ticket separation:
1. Feed to a tear-off edge
2. Feed - cut - back positioning
3 Feed - double cut (remove perforation) - back positioning
4 Eject single ticket
12.7.1 END OF TICKET (EoT)
[Name]
EoT
[Format]
ASCII
<ESC> “e”
(Param a) (Param b)
Hex
1Bh
65h
(Param a) (Param b)
Decimal 27d
101d
(Param a) (Param b)
[Description]
With the parameter flags a specific „End of ticket“ action can directly be requested.
In parameter module 24 these actions can be permanently set.
Param a bit 0:
EoT1 identifier
0: for EEPROM param
1: for parameter transfer in command
Param a bit 1:
(24,2) EoT_NoCut:
0: cut / 1: no cut
Param a bit 2:
(24,4) EoT_NoFullCut
0: full cut / 1: half cut or segment cut
Param a bit 3:
(24,3) EoT_DoubleCut
0: no double cut =
1: double cut with
parameter 24,3
Param a bit 4:
0: reserved
Param a bit 5:
(24,5) EoT_Cut_NoBackfeed
0: backfeed after cut with
parameter 22,3
Param a bit 6:
0: reserved
Param a bit 7:
0: reserved
Param b bit 0-7:
0: reserved
Modul 24 EoT
24,1:
u_w
o
utput equipment
0: Cutting edge / 1: Cutter
24,2:
u_a
e
nable cuts
1: enable cuts / 0: disable cuts
24,3:
u_a
distance between cuts [
2 dotlines] for double cut
24,4:
u_a
partial/full cut
1: partial cut / 0: full cut
24,5:
u_a
Enable feed after cut
1: enable / 0: disable
24,6:
u_w
Picking timeout [seconds]
0: no timeout
24,7:
u_a
TRUE: 1st cut only on Paper End condition / FALSE: Inhibit cuts
24,8:
u_a
eject length [dmm]
0: do not eject paper on PaperEnd condition
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 107 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
