GeBe C32, Software Manual

Page: 29 / 166

SOFTWARE MANUAL C32
41,20 e_w typical strobes ON time [µs] working point at 25°C / speed low
41,21 e_w minimum strobes ON time [µs]
41,22 e_w maximum strobes ON time [µs]
41,23 e_w VP [mV] belonging to 1st data point of Vp heating adjustment table
41,24 e_w Vp heating adjustment table: input value difference [mV]
41,25 e_w Vp heating adjustment table: scaling bits
41,26 e_w Vp heating adjustment table
41,27 e_w temperature ADC value belonging to 1st data point of head temperature heating adjustment table
41,28 e_w head temperature heating adjustment table: input value difference [ADC value]
41,29 e_w head temperature heating adjustment table: scaling bits
41,30 e_w head temperature heating adjustment table
41,31 e_w line time [µs] belonging to 1st data point of line time heating adjustment table
41,32 e_w line time heating adjustment table: input value difference [µs]
41,33 e_w line time heating adjustment table: scaling bits
41,34 e_w line time heating adjustment table
41,35 e_w preheat temperature [°C] [°F]
41,36 e_w preheat temperature tolerance [1/10°C] [33.8/50°F]
41,37 e_w preheat strobes on time [µs], 0: preheat strobes disabled
41,38 e_w preheat pattern
41,39 e_w preheat cycle time [µs]
41,40 e_w head platen force [dN]
41,41 e_w head platen force tolerance [dN]
41,42 e_w head alignment [µm]
41,43 e_w head alignment tolerance [µm]
41,44 e_w preheat stage 2 cycle time [µs]
Module 42 Rotary cutter
42,3 e_w distance from dot line to cut [dot lines]
42,4 u_w TRUE: always move cutter blade to home position on init command
FALSE: move blade only when out of home position
Module 44 Charge
44,1 e_w battery type 1
44,2 e_w maximum charging time 26
44,3 e_w Vp_Count 60
44,4 e_w Vp_Repeat 3
44,5 e_w Vp_Delta t 10
44,6 e_w maximum Vp 155
44,7 e_w maximum Vp_Max_Repeat 16
44.8 e_w Temp_Count 60
44,9 e_w Temp_Repeat 4
44,10 e_w Temp_Delta 100
44,11 e_w maximum temperature 79
44,12 e_w maximum Temp_Repeat 3
44,13 e_w minimum Vp 139
44,14 e_w Trickle_Charge_OnTime 1
44,15 e_w minimum Vp_Delta 128
GeBE Elektronik und phone +49.89.894141-0 GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH fax +49.89.894141-33 date July 7, 2020
Beethovenstraße 15 page 29 | 166
82110 Germering email info@gebe.net Our general terms of business are to be applied.
Germany Internet www.gebe.net Errors and changes reserved.