SOFTWARE MANUAL C32
53: 35h
GMID_Stats.Collect
0000 GROUP
end detection for group of all statics value messages
0001 POR
number of power-on cycles
0002 RUNTIME_PRINTER
operation time of the printer in minutes
0003 RUNTIME_HEAD
operation time printhead in minutes (hardware dependent)
0004 OPERATING_TEMP_MXX_M40
number of print starts at head temperature under -40°C
0005 OPERATING_TEMP_M40_M30
number of print starts at heat temperature -40°C to -30°C
0006 OPERATING_TEMP_M30_M20
number of print starts at heat temperature -30°C to -20°C
0007 OPERATING_TEMP_M20_M10
number of print starts at heat temperature -20°C to -10°C
0008 OPERATING_TEMP_M10_000
number of print starts at heat temperature -10°C to 0°C
0009 OPERATING_TEMP_000_P10
number of print starts at heat temperature 0°C to +10°C
000A OPERATING_TEMP_P10_P20
number of print starts at heat tempe10°C to +20°C
000B OPERATING_TEMP_P20_P30
number of print starts at heat tempe20°C to +30°C
000C OPERATING_TEMP_P30_P40
number of print starts at heat tempe30°C to +40°C
000D OPERATING_TEMP_P40_P50
number of print starts at heat tempe40°C to +50°C
000E OPERATING_TEMP_P50_P60
number of print starts at heat tempe50°C to +60°C
000F OPERATING_TEMP_P60_P70
number of print starts at heat tempe60°C to +70°C
0010 OPERATING_TEMP_P70_P80
number of print starts at heat tempe70°C to +80°C
0011 OPERATING_TEMP_P80_PXX
number of print starts at heat tempe80°C or more
0012 FEEDLENGTH_PRINTER_METER
operation performance of the system [m]
0013 FEEDLENGTH_HEAD_METER
operation performance of the printhead [m]
0014 FEEDLENGTH_HEAD_LINES
operation performance of the printhead [dotlines]
0015 PAPER_LENGTH
paper length since the last paper exchange [dm]
0016 PE
number of detected exchange on PE
0017 HEADUPS
number of detected HeadUps
0018 CUTS
number of cutter cuts
0019 EOT
number of EoT processes
002A SHUT DOWN
number of failed shut downs via deactivation of VCC-enable
54:
36h
GMID_Stats.Tracing
0000 GROUP
end detection for group of all tracing data messages
0001 PRINTMOTOR1TIME
motor1-S.L.T. [us]
0002 PRINTISRLAGTIME
printer call delay [us]
0003 PRINTISRRUNTIME_IDLE
printer running time PRINTISRSTATE_IDLE [us]
0004 PRINTISRRUNTIME_RESUME
printer running time PRINTISRSTATE_RESUME [us]
0005 PRINTISRRUNTIME_PRELINE
printer running time PRINTISRSTATE_PRELINE [us]
0006 PRINTISRRUNTIME_STARTLINE
printer running time PRINTISRSTATE_STARTLINE [us]
0007 PRINTISRRUNTIME_PREHEAT
printer running timePRINTISRSTATE_PREHEAT [us]
0008 PRINTISRRUNTIME_DOSTROBES
printer running time PRINTISRSTATE_DOSTROBES [us]
0009 PRINTISRRUNTIME_CLOSELINE
printer running time PRINTISRSTATE_CLOSELINE [us]
000A PRINTISRRUNTIME_AWAIT_STATUS printer running time PRINTISRSTATE_AWAIT_STATUS [us]
000B RACING_PRINTISRRUNTIME_FIRSTLINE printer running time PRINTISRSTATE_FIRSTLINE [us]
000C PRINTISRRUNTIME_NOLINE
printer running time PRINTISRSTATE_NOLINE [us]
000D PRINTISRRUNTIME_SUSPEND
printer running time PRINTISRSTATE_SUSPEND [us]
000E PRINTSTROBESTON
strobe T_ON [us]
000F PRINTISRRUNTIME_RETARDATION printIsr running time PRINTISRSTATE_RETARDATIONS [us]
0010 DOTR_AVERAGE_OHM
measured average dot resistance value [Ohm]
GeBE Elektronik und
phone
+49.89.894141-0
GeBE-document-no. SoMAN-C32-E-V2.2-0793
Feinwerktechnik GmbH
fax
+49.89.894141-33
date
July 7, 2020
Beethovenstraße 15
page 46 | 166
82110 Germering
Our general terms of business are to be applied.
Germany
Internet
www.gebe.net
Errors and changes reserved.
