Furuno FAR 3220, Installation Manual

Page: 87 / 245

2. WIRING
2-45
11. Connect the shield
wires of the antenna
cable and serial cable
for processor unit to
each grounding point.
12. Reattach the cable clamp assembly.
13. Remove the connector cover for the power cable (2 places).
14. Fabricate the power cable (DPYC-2.5) as shown below.
15. Pull up the plastic cover and connect the power cable.
16. Remount the connector cover for the power cable.
17. Reattach the cover of the power supply unit.
2.8 Transceiver Unit
The TR-DOWN radar requires the transceiver unit as follows:
• Transceiver Unit RTR-108 for X-band radar
• Transceiver Unit RTR-109 for S-band radar
2.8.1 How to fabricate the cables
For how to connect the LAN modular plug, see "LAN cable" on page 2-5. For how to
connect the WAGO connector, see "WAGO connector" on page 2-5.
Grounding point (for antenna cable) Grounding point (for antenna cable)
Grounding point
(for serial cable for processor unit) Grounding point
(for serial cable for processor unit)
Connector cover of power cable
Plastic cover
Vinyl tape
Armor
FV2-M4
35
25
30
Sheath (Clamp here.) Sheath (Clamp here.)