Furuno FAR 3220, Installation Manual

Page: 100 / 245

2. WIRING
2-58
2.10.2 MC-3010A/3020D/3030D
• MC-3010A: Inputs analog signal. To use MC-3010A as current input, connect short
pins to each terminals.
• MC-3020D: Inputs digital signal (8ch contact input). Contact or voltage input is se-
lectable (contact input requires short pins).
• MC-3030D: Outputs digital signal (8ch, normal open/close).
Fabrications
MC1.5-W-L600/1000/2000/3000 cable
(Input)
Vinyl tape
(width: 10) Vinyl tape
(width: 10) Vinyl tape
(width: 10)
Shield
(fold back) Shield
(fold back) Shield
(fold back)
Core: 6 Core: 6 Core: 6
30 30 30 120 120 120
TTYCSLA-1 (MC-3010A)
Vinyl tape
(width: 10) Vinyl tape
(width: 10) Vinyl tape
(width: 10)
80 80 80
60 60 60
60 60 60
Pass drain wire through shrink tubing
(local supply), then attach crimp-on lug
(pre-attached in unit).
Core: 6 Core: 6 Core: 6
MPYC-12 cable (MC-3030D)
MC1.5-W-L600/1000/2000/3000 cable
(Output)
Vinyl tape
(width: 10) Vinyl tape
(width: 10)
Shield
(fold back) Shield
(fold back)
Core: 6 Core: 6
30 30
100 100
80 or
more 80 or
more
Not used: Cut with 50,
and wind tape to insulate.
Not used: Cut with 50,
and wind tape to insulate.
125 125
85 85
Core: 6 Core: 6
MPYC-12 cable (MC-3020D)
Not used: Cut with 50,
and wind tape to insulate.
Not used: Cut with 50,
and wind tape to insulate.
TTYCS-1 (MC-3010A)
80 or
more 80 or
more
135 135
95 95
Core: 6 Core: 6
Vinyl tape
(width: 10) Vinyl tape
(width: 10)
80 or
more 80 or
more
Shield
(fold back) Shield
(fold back)
30 30
60 60
Core: 6 Core: 6