Furuno FAR 3220, Installation Manual

Page: 12 / 245

SYSTEM CONFIGURATION
x
Radar Component Combinations
Notes
1) The gyrocompass must be type approved for compliance with IMO resolution A.424(XI) (and/
or resolution A.821(19) for installation on HSC). The gyrocompass must also have an update
rate that is adequate for the ship’s rate of turn. The update rate must be better than 40 Hz
(HSC) or 20 Hz (conventional vessel).
2) The EPFS must be type approved for compliance with IMO resolution MSC.96(72).
3) The monitors listed in the following table have been approved by the IMO.
If a different monitor is to be used on IMO vessels, its effective diameter must meet the appli-
cable Category requirements.
For installation and operation of other monitors, see the respective manuals.
For BB types, a monitor unit is prepared by the user.
*: For use with radar only; do not use for Back-up ECDIS.
RADAR
MODEL ANTENNA
UNIT
TRANSCEIVER
UNIT
POWER SUPPLY
UNIT
FAR-3x10
FAR-3x20
XN12CF-RSB-128
XN20CF-RSB-128
XN24CF-RSB-128
RTR-105
PSU-014
RTR-106
FAR-3x20-NXT RTR-123
FAR-3x20W
XN20CF-RSB-130
XN24CF-RSB-130
RTR-108
FAR-3x30S
SN24CF-RSB-129
SN30CF-RSB-129
SN36CF-RSB-129
RTR-107
PSU-014
PSU-015
FAR-3x30SW SN36CF-RSB-131 RTR-109
FAR-3x30S-SSD
SN24CF-RSB-133
SN30CF-RSB-133
SN36CF-RSB-133
RTR-111
PSU-016
PSU-018
• CAT 1C and CAT 1HC: effective diameter of 320 mm or higher
• CAT 2C and CAT 2HC: effective diameter of 250 mm or higher
Category Maker Model Viewing distance
CAT 1C and
CAT 1HC FURUNO MU-231 1.02 m
MU-231CE 1.02 m
MU-270W 1.02 m
Hatteland Technology JH23T12FUD* 1.02 m
JH23T14FUD 1.02 m
HD26T22 FUD 0.99 m
HD26T21 MMD 0.99 m
HD27T22 FUD 1.07 m
HD32T22 FUD 1.15 m
HD55T22 FUD 1.95 m
North Invent WA270-01.MON.01 1.07 m
WA460-01.MON.01 1.64 m
CAT 2C and
CAT 2HC FURUNO MU-190 1.02 m
MU-201CE 1.08 m
Hatteland Technology JH19T14FUD 1.02 m
JH20T17FUD 0.88 m
HD19T22FUD 1.01 m
HD24T22FUD 0.86 m