Furuno FAR 3220, Installation Manual

Page: 85 / 245

2. WIRING
2-43
4. Pass the LAN and serial cables through the cable clamp.
5. As shown below, fabricate the cables. For retrofit, the optional LAN Signal Con-
verter kit. See section 2.11 for wiring.
TTYCS(LA)-1Q
LAN cable
See "How to fabricate the LAN cable" on page 2-36 for how to attach the LAN
cable connector.
6. Connect the cables fabricated at step 4 as shown below.
1. Insert the cable. 1. Insert the cable.
2. Pass the cable
to next lane.
2. Pass the cable
to next lane.
LAN cable
Serial cable
Set the cable. Set the cable.
5
Drain wire
Armor
Sheath
(Clamp here.)
Vinyl tape
200
40
Pass the vinyl sheath (local supply) onto the drain wire,
then attach the crimp-on lug (preattached to the earth
clamp on the processor unit) to the wire.
Crimp-on lug
4
3
2
1
5
30
60
Vinyl tape
40
30
280
Outer sheath
Inner sheath
Connect serial cable
from processor unit to
TB132 on PSU-TB
Board. Connect serial cable
from processor unit to
TB132 on PSU-TB
Board.
Connect LAN cable from
processor unit to J101
on PSU-CNTL Board.
4 3 2 1 5
Clamp the sheath. Clamp the sheath.
Clamp the inner sheath. Clamp the inner sheath.