Furuno FAR 3220, Installation Manual

Page: 161 / 245

APPX. 4 ALERT LIST
AP-23
3015, 27 453 Lost SDME Sig-
nal Check speed sensor or sensor status Warning
Cat: B
Meaning : Speed data from all available SDME has been not available for more
than 3 seconds.
Remedy : Check the connection with SDME and sensor status.
3015, 28 278 Lost LOG(WT)
SIG Check speed sensor or sensor status Warning
Cat: B
Meaning: STW data of all available LOG (water speed) sensors has been not
available for more than 3 seconds.
Remedy : Check the connection with LOG sensors and sensor status.
3015, 30 380 Lost AIS COM Check connection with AIS Warring
Cat: B
Meaning : Data from AIS has been discontinued for more than set time. (Set at
installation) Default: 60 seconds. AIS is turned off, or there is a problem with net-
work.
Remedy : Check the connection with AIS and network.
3016, 19 801 Lost PM Execute the self test Caution
Cat: B
Meaning : There is a problem communicating with the PM board in the radar an-
tenna.
Remedy : For detailed information, conduct a [Self Test].
3016, 20 805 Lost PM BOARD Execute the self test Caution
Cat: B
Meaning : There is a problem communicating with the MTR-DRV board in the ra-
dar antenna.
Remedy : Check connections between the radar antenna and the processor unit.
If the problem appears to be caused by the radar antenna, contact your local
dealer for service.
3016, 24 382 Lost COG/SOG
SIG Check position sensor status Caution
Cat: B
Meaning : COG/SOG data of all available GPS sensor has been not available for
more than 3 seconds.
Remedy : Check the connection with all GPS.
3016, 25 383 Lost LOG (BT)
SIG Check speed sensor or sensor status Caution
Cat: B
Meaning : SOG data of all available LOG (ground speed) sensors has been not
available for more than 3 seconds.
Remedy : Check that the sensor is powered.
3016, 28 384 Lost LOG(WT)
SIG Check speed sensor or sensor status Caution
Cat: B
Meaning: STW data of all available LOG (water speed) sensors has been not
available for more than 3 seconds.
Remedy : Check the connection with all LOG sensors.
3016, 30 381 Lost AIS COM Check connection with AIS Caution
Cat: B
Meaning : Data from AIS has been discontinued for more than set time. (Set at
installation) Default: 60 seconds. AIS is turned off, or there is a problem with net-
work.
Remedy : Check the connection with AIS and network.
Alert ID
Alert title Alert Message
Priority &
Category
ALF ALR