Furuno FAR 3220, Installation Manual

Page: 179 / 245

APPX. 4 ALERT LIST
AP-41
10001, 8 017 Sub Monitor Fan4 Rota-
tion Speed Lowering There is a problem with No.4 Fan of FURUNO Mon-
itor. Please exchange it
Meaning : For FURUNO monitor: Connected to COM2 (Sub Monitor). Fan4 ro-
tation speed is below threshold.
Remedy : If the error frequently occurs, contact FURUNO and inform frequency
of occurrence.
10001, 9 011 Main Monitor RS485
Communication Timeout There is a problem with brightness control cable.
Please exchange it
Meaning : For Main monitor: Connected to COM1. There has been no commu-
nication from processor unit through RS485 for 180 seconds. (No communica-
tion implies in completed sentence or checksum error.)
Remedy : Check the connection of brightness control cable.
10001, 10 024 Sub Monitor RS485
Communication Timeout There is a problem with brightness control cable.
Please exchange it
Meaning : For Sub monitor: Connected to COM2. There has been no communi-
cation from processor unit through RS485 for 180 seconds. (No communication
implies in completed sentence or checksum error.)
Remedy : Check the connection of brightness control cable.
10001, 11 012 Main Monitor No Signal There is a problem with video cable. Please ex-
change it
Meaning : For Main monitor: Connected to COM1. There has been no signal
continuously for 60 seconds.
Remedy : Check the connection of video cable.
10001, 12 025 Sub Monitor No Signal There is a problem with video cable. Please ex-
change it
Meaning : For Sub monitor: Connected to COM2. There has been no signal con-
tinuously for 60 seconds.
Remedy : Check the connection of video cable.
10001, 13 013 Main Monitor Sentence
Syntax Error There is a problem with brightness control cable.
Please exchange it
Meaning : For Main monitor, connected to COM1, value of externally input sen-
tence is out of range that defined by sentence.
Remedy : If the error frequently occurs, contact FURUNO and inform frequency
of occurrence.
10001, 14 026 Sub Monitor Sentence
Syntax Error There is a problem with brightness control cable.
Please exchange it
Meaning : For Main monitor, connected to COM2, value of externally input sen-
tence is out of range that defined by sentence.
Remedy : If the error frequently occurs, contact FURUNO and inform frequency
of occurrence.
10001, 15 027 Main Monitor COM Tim-
eout There is a problem with brightness control cable.
Please exchange it
Meaning : Communication with MU is interrupted. 60 seconds timeout.
Remedy : Check the connection with the monitor.
10001, 16 028 Sub Monitor COM Time-
out There is a problem with brightness control cable.
Please exchange it
Meaning : Communication with MU is interrupted. 60 seconds timeout.
Remedy : Check the connection with the monitor.
Alert ID
Alert title Alert Message
ALF ALR