Furuno FAR 3220, Installation Manual

Page: 77 / 245

2. WIRING
2-35
2.6.1 How to connect cables to terminals in the processor unit
Use screws (M3

6, supplied) to attach the wiring plate 1 and wiring plate 2 to the pro-
cessor unit. Connect the cables shown below to the connectors at the front of the pro-
cessor unit. Bind cables to the appropriate fixing metal with the cable ties (supplied).
For the cables from the monitor unit (type: DVI-D/D SLINK5M/10M (MU-190 only),
DSUB9P-X2-L5/10M) and ground wire, connect them to the processor unit directly
(without fixing to a wiring plate). Tighten the fixing screws on these connectors to pre-
vent disconnection from the processor unit.
Note: Connect the cables so that they do not interfere with the opening or closing of
the DVD tray.
Cables connected at the wiring plate 1
• USB cables from the control units
• Printer cable
• LAN cable (type: DTI-C5E350 VCV) from the HUB-3000
• LAN cable (type: FR-FTPC-CY) from the HUB-100/MC-3000S
Cables connected at the wiring plate 2
• Power cable (Type: IEC60320-C13-L5M)
• LAN cable to the LAN3 port
Slide the plate toward the
unit to hide LED and
switches.
Wiring plate 2
Wiring plate 1
MU-190/231/270W
(DVI1: DVI-D/D S-LINK cable,
COM1: DSUB9P-X2-L cable)
COM1
DVI3
USB1
RCU-025/026
(TS-20-071-1 cable)
USB2/3
Optional control unit
RCU-024/025/026 (TS-20-071-1 cable)
HUB-3000
(DTI-C5E350 VCV
cable)
LAN1
LAN2
DVI1
COM2
Cable clamp
Ground wire
(IV-2sq.,
local supply)
Power cable
(IEC60320-C13-
L5M cable)
USB4
For USB printer
LAN3
MOD-Z072-005+
DVI2 MU-190/231/270W
(DVI2: DVI-D/D S-LINK cable)
VDR
(DVI3: BNCX5-L2000
cable)
(COM2: DSUB9P-X2-L cable)
HUB-3000*/MC-3000S
(MC-3000S: FR-FTPC-CY cable,
within 50m
HUB-3000: DTI-C5E350 VCV cable)
*: Use Switching HUB-100 for
IEC61162-450 Ed.1
compliant network.