Furuno FAR 3220, Installation Manual

Page: 184 / 245

APPX. 4 ALERT LIST
AP-46
10002, 19 088 Processor Unit CPU
board 12V Power Error CPU board power voltage is abnormal in Processor
Unit. Please turn off Processor Unit. If same error is
occurred after a few minutes, please contact to ser-
vice department of Furuno
Meaning : 12 V power voltage of CPU board in processor unit is out of threshold.
Remedy : If the error frequently occurs, contact FURUNO and inform frequency
of occurrence.
10050, 1 320 Lost CH1 COM Check the serial port status
Meaning : Input from EC-3000 serial ch.1 has been discontinued for more than
certain time (Set at installation). Default: No timeout
Remedy : Check the status of the serial port.
10050, 2 321 Lost CH2 COM Check the serial port status
Meaning : Input from EC-3000 serial ch.2 has been discontinued for more than
certain time (Set at installation). Default: No timeout
Remedy : Check the status of the serial port.
10050, 3 322 Lost CH3 COM Check the serial port status
Meaning : Input from EC-3000 serial ch.3 has been discontinued for more than
certain time (Set at installation). Default: No timeout
Remedy : Check the status of the serial port.
10050, 4 323 Lost CH4 COM Check the serial port status
Meaning : Input from EC-3000 serial ch.4 has been discontinued for more than
certain time (Set at installation). Default: No timeout
Remedy : Check the status of the serial port.
10050, 5 324 Lost CH5 COM Check the serial port status
Meaning : Input from EC-3000 serial ch.5 has been discontinued for more than
certain time (Set at installation). Default: No timeout
Remedy : Check the status of the serial port.
10050, 6 325 Lost CH6 COM Check the serial port status
Meaning : Input from EC-3000 serial ch.6 has been discontinued for more than
certain time (Set at installation). Default: No timeout
Remedy : Check the status of the serial port.
10050, 7 326 Lost CH7 COM Check the serial port status
Meaning : Input from EC-3000 serial ch.7 has been discontinued for more than
certain time (Set at installation). Default: No timeout
Remedy : Check the status of the serial port.
10050, 8 327 Lost CH8 COM Check the serial port status
Meaning : Input from EC-3000 serial ch.8 has been discontinued for more than
certain time (Set at installation). Default: No timeout
Remedy : Check the status of the serial port.
10312, - 510 Lost MODBUS COM Check MODBUS status and connection
Meaning : Connection to the IAS (MODBUS) is lost or interrupted.
Remedy : Check connection.
10740, 1 730 ISW: STBY Selected radar entered standby mode. Set selected
radar to TX mode
Meaning: The antenna unit selected with the Interswitch is in stand-by
Remedy : Set the antenna unit to transmit state.
10740, 2 740 ISW: NO SIGNAL Selected radar has problem. Use radar as stand-
alone
Meaning: No video signal from the antenna unit selected with the Interswitch.
Remedy : Check the antenna unit. Use radar as standalone.
Alert ID
Alert title Alert Message
ALF ALR