Furuno FAR 3220, Installation Manual

Page: 95 / 245

2. WIRING
2-53
Attach the cables to the applicable pins.
Note 1: Use the MC1.5-W cable between the sensor adapters.
Note 2: The total length of the MC1.5-W cables must be less than 6 m to prevent mal-
function.
2.10.1 MC-3000S
Use the LAN cable FR-FTPC-CY cable to connect the MC-3000S and the processor
unit. With HUB-100, a maximum of eight MC-3000S can be connected.
Fabrications
Pin no. Cable color Signal
1 Red 24V_OUT or 24V_IN
2 Black 24V_GND
3 White MODBUS-A
4 Blue MODBUS-B
5 Gray GND
LAN cable (FR-FTPC-CY)
50 50 30 30
See section 2.1.2. for
the fabrication.
See section 2.1.2. for
the fabrication.
TTYCS-1Q cable
Core: 6 Core: 6
(J8)
#1 to 4: 110
#5 to 8: 95 (J8)
#1 to 4: 110
#5 to 8: 95 (J9)
#1 to 4: 100
#5 to 8: 90 (J9)
#1 to 4: 100
#5 to 8: 90
30 30
80 or
more 80 or
more
Shield (fold back) Shield (fold back)
Vinyl tape
(width: 10) Vinyl tape
(width: 10)
MC1.5-W-L600/1000/2000/3000 cable
100 100
20 20
10 10
Core: 6 Core: 6
Vinyl tape Vinyl tape
Shield
(fold back) Shield
(fold back)
TTYCSLA-1Q cable
Core: 6 Core: 6
(J8)
#1 to 4: 110
#5 to 8: 95 (J8)
#1 to 4: 110
#5 to 8: 95 (J9)
#1 to 4: 100
#5 to 8: 90 (J9)
#1 to 4: 100
#5 to 8: 90
80 or
more 80 or
more
Vinyl tape
(width: 10) Vinyl tape
(width: 10)
See Note 1. See Note 1.