Furuno FAR 3220, Installation Manual

Page: 135 / 245

3. SETTINGS AND ADJUSTMENTS
3-15
3.10 How to Change the Display Color for Sensor
Data Based on Integrity
The following procedure shows how to change the color of the data in the sensor in-
formation box based on the results of the Integrity Check. For the Integrity Check, see
the Operator’s Manual for the Chart Radar.
1. In the chart mode, press Ctrl , Shift and t keys simultaneously on the control unit
or keyboard. A dialog box for entry of password appears.
2. Enter the password and click the [OK] button.
Note: The edit mode remains enabled until you press Ctrl , Shift and t keys simul-
taneously or reboot the unit.
3. Click [MENU] to open the menu.
4. Click [Ship & Route Parameters], then click the [Function2] tab.
5. Check the checkbox of [Show status regarding own ship information in menu win-
dow.].
6. Click the [Save] button to save the configuration.
3.11 How to display the [Echo] page
To overlay the radar image on the chart mode, display the [Echo] page in the [Overlay/
NAV Tools] box. For details, see the Operator's Manual for the Chart Radar.
Note 1: For B-type radar, the [Echo] page is not available regardless of this setting.
Note 2: In radar mode, set the radar to transmit to show the radar image on the chart
mode.
1. In the chart mode, press Ctrl , Shift and t keys simultaneously on the control unit
or keyboard. A dialog box for entry of password appears.
2. Enter the password and click the [OK] button.
Note: The edit mode remains enabled until you press Ctrl , Shift and t keys simul-
taneously or reboot the unit.
3. Click [MENU] to open the menu.