Furuno FAR 3220, Installation Manual

Page: 136 / 245

3. SETTINGS AND ADJUSTMENTS
3-16
4. Click [Ship & Route Parameters], then click the [Function2] tab.
5. Check the checkbox of [Show Echo tab at Overlay/NAV Tools].
6. Click the [Save] button to save the configuration.
3.12 Web Setting Menu
The setup of the Back-up ECDIS must be completed by a FURUNO approved service
engineer. For details, see the Instruction Manual (E32-01305).
3.13 How to Set Up the Back-up ECDIS
The set up of the back-up ECDIS must be completed by a FURUNO approved service
engineer. For details, see the Instruction Manual (E32-01305).
When Back-up ECDIS mode is active, the following changes occur:
3.14 ICE Mode
The ICE mode function helps to identify “sea ice” on a radar echo easily. To activate
this function, a paid unlock code is required. To purchase an unlock code, contact your
dealer.
• Own Ship Look-ahead Area function is fixed to ON and cannot be disabled.
• The talker for some route-related sentences and alerts changes to
"EI".
• Display Mode button changes to show "Back-up ECDIS".
• Some information sent to a VDR (ECDIS display source information
and LAN images) is sent with the prefix "EI" instead of "RA" and the equipment num-
ber changes as outlined in section 1.2.1 of the Instruction Manual.