Furuno FAR 3220, Installation Manual

Page: 93 / 245

2. WIRING
2-51
5. Check that armor of cables are lying in their respective cable slots then fasten the
cable clamp.
Microwave coaxial plug
Attach the microwave coaxial plug to the coaxial cable. See the applicable FURUNO
technical information for the procedure. Attach the coaxial cable assembly to the
transceiver unit as follows:
1. Unfasten four bolts (M6

10) to remove the dust cover from the output WG adapt-
er.
2. Fasten eight bolts (removed at step 1) to attach the flange to the transceiver unit.
3. Attach the coaxial cable to the converter of the flange.
2.9 Monitor Unit
For the wiring of the monitor unit, see the operator’s manual supplied with the monitor
unit. Also, for resolution and image data output settings, see the Instruction Manual
(E32-01305-*).
Mounting considerations
• Connect the radar main monitor to the DVI1 and COM1 ports.
• Connect the sub radar monitor to the DVI2 and COM2 ports.
Menu Settings
The [INSTALLATION SETTING] menu appears only when the power is turned on for
the first time after installation of the monitor unit.
Adjust the settings referring to the following table.
M6×10 (4 pcs.)
Circulator
Adapter
Output WG
adapter
Coaxial cable
Converter
: M6×20 (8 pcs.)
Transceiver unit, inside view
Flange
INSTALLATION SETTING
EXT BRILL CTRL
SERIAL BAUDRATE
COLOR CALIBRATION
KEY LOCK
SAVE AND EXIT
RS-485
4800bps
ON
ON
YES
(OFF/DVI1/DVI2/RS-232C/RS-485/USB)
(4800/9600/19200/38400)
(OFF/ON)
(OFF/ON)
(NO/YES)
Menu
Menu item