Furuno FAR 3220, Installation Manual

Page: 10 / 245

SYSTEM CONFIGURATION
viii
Interswitch connection
When multiple radars are used, connect the units as shown in the figure below. This configuration
lets each radar as a standalone radar in case of HUB malfunction.
EC-3000
PROCESSOR
UNIT
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
ECDIS Control Unit RCU-024
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
(Max. 2)
Select one
Select one
VDR
Intelligent HUB
HUB-3000
POWER SUPPLY UNIT
ANTENNA UNIT
TRANSCEIVER UNIT
LAN3
LAN1
LAN2
100-230 VAC
1ø, 50-60 Hz
100-115/220-230 VAC
1ø, 50-60 Hz (For de-icer)
Sub Monitor
Gateway network
equipment
(Radar, ECDIS, etc.)
Serial8
LAN2
- Digital Out×6
(Power fail/system
fail/NO×2.NC×2)
- Digital in (ACK in)
Monitor Unit
MU-190/MU-231/MU-270W
(or equivalent for -BB model)
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
ECDIS Control Unit RCU-024
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
(Max. 2)
Select one
Select one
VDR
- Digital Out×6
(Power fail/system
fail/NO×2.NC×2)
- Digital in (ACK in)
EC-3000
PROCESSOR
UNIT
LAN3 Serial8
LAN1
100-230 VAC
1ø, 50-60 Hz
Sub Monitor
100-115/220-230 VAC
1ø, 50-60 Hz
100-115/220-230 VAC
1ø, 50-60 Hz
POWER SUPPLY UNIT
ANTENNA UNIT
TRANSCEIVER UNIT
100-115/220-230 VAC
1ø, 50-60 Hz (For de-icer)
Monitor Unit
MU-190/MU-231/MU-270W
(or equivalent for -BB model)
Serial 1 to 4 (IEC 61162-1/2)
Serial 5 to 7 (IEC 61162-1)
Serial 1 to 4 (IEC 61162-1/2)
Serial 5 to 7 (IEC 61162-1)
Sensor Adapter
MC-3000S
Serial
interface
Sensor Adapter
MC-3010A
Sensor Adapter
MC-3020D
Sensor Adapter
MC-3030D
VDR
Analog
interface
Digital in
interface Digital out
interface
• Solid lines indicate standard
supply equipment.
• Dashed lines indicate optional
or local supply equipment.
Intelligent
HUB
HUB-3000*
*: Use Switching
HUB-100 for
IEC61162-450 Ed.1
compliant network.