Furuno FAR 3220, Installation Manual

Page: 63 / 245

2. WIRING
2-21
Antenna cable RW-9600/6895/4873 (for retrofit installation)
The optional LAN signal converter kit is required for retrofit installation. For wiring in
case of a retrofit, see section 2.11.
The white, red, and green wires are not used. Attach a single crimp-on lug (FV5.5-
S4(LF), yellow) locally to the wires. (These wires will be connected together with the
shield of the power line, in the next section.)
Cable for a sub monitor S03-92-15/30/40/50(8P) (RW-00136+connector)
Note: The maximum cable length is 50 m.
Cable DPYCY-1.5 (for the optional deicer)
• Before beginning any work on the antenna unit, turn off the breaker for the de-icer
at the mains switchboard. (Turning off the display unit has no effect.)
• The de-icer activates when the temperature becomes 0 °C, and shuts down when
the temperature reaches 5 °C.
Wrap the spiral tubing near the crimp-on lugs.
Armor
Sheath
Crimp-on lug
Shield* Shield*
470 470
*: Two shields for RW-4873
Sheath Sheath
Vinyl tape
Coaxial
cable
Coaxial
cable
6
10 30
14
5
9
L L
400 400
L: 480 (Magnetron radar)
500 (Solid state radar)
6
L1 L1
10 10 30 30
Outer
sheath
Armor
Inner
sheath
Shield Shield
Coaxial cable Coaxial cable
L2 L2
L3 L3
450
310
270
390
Vinyl tape
S-band (TR-UP, magnetron)
S-band (TR-UP, solid state)
L1 L2 L3
Radar type
Crimp-on lug
(FV5.5-4(LF),
local supply)
(unit: mm)
14 14 14 14
5 5
Folded shield
6
1310 1310
30 30 10 10
Outer sheath
Armor
Inner sheath
Vinyl tape
Spiral tubing
Crimp-on lug
(FV2-M4)
(unit: mm)