2
1
4
6
5
3
MOUNTING: NAC-1
MOUNTING: Precision-9
7
Without bracket
With bracket
3
2
1
Outboard and
DrivePilot
Installation Guide
ENGLISH
NAC-1
Operating temperature
-25 °C to +55 °C (13 °F to 131 °F)
Protection
Splashproof, IPx5
Weight
0.6 kg (1.3 lbs)
Power supply/Load
9-16 V DC/140 mA + drive unit load
Performance
Drive: 8 A cont., 16 A for 1 s
Pump-1
Operating temperature
-15 °C to +75 °C (5 °F to 167 °F)
Protection
Splashproof, IPx5
Weight
2.2 kg (4.9 lbs)
Hydraulic thread size
1/4 NPT
Load
5 A at 8 bar (116 psi), 7 A at 24 bar (350 psi)
Performance
0.8 l/min at 24 bar (350 psi)
Point-1AP
Operating temperature
-25 °C to +60 °C (13 °F to 140 °F)
Protection
Watertight, IPx7
Weight
0.14 kg (0.31 lbs)
Power supply/Load
9-16 V DC/<100 mA @ 12 V DC
Performance
Heading: +/- 3°, Horiz. accuracy: 3 m (9.8 ft)
Compass safe distance
1 m (3.3 ft)
Auto/Stby Button
Operating temperature
-25 °C to +55 °C (13 °F to 131 °F)
Protection
Splashproof, IPx5
Weight
0.04 kg (0.09 lbs) (including cable)
Precision-9
Operating temperature
-25 to + 65 °C (-13 to + 149 °F)
Protection
IPx7
Weight
165 g (5.8 oz) + 130 g (4.6 oz) (Bracket)
Power supply/Load
8-16 V/1.4 W
Accuracy
± 2 degrees after calibration
Compass safe distance
0.5 m (1.7 ft)
PLANNING: Pump-1, Mounting location
CORRECT
FLUID LEVEL
PLANNING: Dimensions
Technical specifications
PLANNING: Cable lengths
Screwdriver
Drill
Wrench
Cup or can
Tape
Tools to connect power cables to the battery
Gloves (disposable type)
PLANNING: Tools needed
Refer to “WIRING: Wiring diagram” (point 9) to find the
various cable lengths.
PLANNING: Point-1AP and Precision-9 Compass,
Mounting location
Point-1AP and Precision-9
The compasses contain a magnetic heading sensor and should not
be mounted close to any potential magnetic source, and as close
to the vessel’s centre of roll and pitch as possible. Refer to technical
specifications.
Potential sources for magnetic/electromagnetic interference include:
•
Electrical Motors/Magnets/Moving Metal items
•
Outboard Engines
•
High current electrical sources such as main power cables,
batteries, distribution panels etc.
The Point-1AP compass also comes with a GPS antenna and should
be mounted as far as possible away from disturbing magnetic/
electromagnetic interferences.
Electromagnetic Interference
Precision-9
57 mm
(2.2”)
180 mm
(7.1”)
190 mm
(7.5”)
204 mm (8.1”)
183 mm (7.2”)
91 mm
(3.6”)
169 mm (6.63”)
ø 90 mm (3.5”)
38 mm
(1.5”)
155 mm (6.1”)
76 mm (3.0”)
85 mm
(3.4”)
100 mm (4.0”)
85 mm (3.4”)
119 mm (4.69”)
36 mm
(1.42”)
119 mm (4.69”)
90 mm
(3.54”)
126 mm
(4.96”)
133 mm (5.23”)
119 mm (4.69”)
126 mm
(4.96”)
72 mm
(2.83”)
90 mm
(3.54”)
Compatibility information
The hydraulic kit comes with both 1/4 NPT 9/16 UNF fittings and ORB
fittings which make them ideally suited for the following steering
systems:
•
Teleflex SeaStar HC5345, HC5347, HC5348, HC5358.
•
Teleflex BayStar HC4600, HC4645, HC4647, HC4648, HC4658.
•
Hynautic K6 Steering Rams
•
Steering rams from Vetus, Uflex, and Lecomble & Schmitt can also
be used.
¼
Note:
Newer SeaStar/BayStar helm pumps require the use of ORB
fittings (supplied in the kit).
8
MOUNTING: Point-1AP
A
C
B
1 * Ø 19 mm (0.75”)
2 * Ø 3 mm (0.12”)
Note the mounting
direction!
D
1
2
3
4
Check the contents
•
NAC-1 Autopilot computer
•
Point-1AP or Precision-9 Compass
•
Auto/Stby Button
•
NMEA 2000 Network kit
•
Pump-1
•
Pump fitting kit
Point-1AP
