Hi-Target GPS HI-TARGET HD-MAX User Manual Download Page 1

Page: 1 / 177

HD-MAX Echo Sounder User Guide

Foreword

Application of Manual

Welcome to use the Manual of HI-TARGET HD-MAX series products. This

Manual describes how to set up and use HD-MAX series products.

Introduction of the Manual

The Manual specifies related instructions on hardware and software of

HD-MAX series products. Please follow the contents of the Manual during

operation.

Experience Requirements

In order to better use HD-MAX series products, HI-TARGET suggests that

the operator shall have certain knowledge on measurement and shall read the

Manual carefully.

For more information about the system, please visit the

official website of HI-TARGET: www.hi-target.com.cn/en

Security technology prompts

Attention

: Special operation needs special attention. Please read the

contents carefully.

Warning

: Very important prompts. Operations not following the

warning contents will cause instrument damage, data loss, system

collapse, and even will endanger personal safety.

Disclaimer

We have checked the contents of the current Rev. of Manual as well as the

consistency between the hardware and software, which doesn't means that the

possibility of deviation has been ruled out. Therefore, we do not guarantee

that the contents described in this Manual, the hardware and software are

Summary of Contents for HI-TARGET HD-MAX


















































































































































































Search results

Summary of Contents for HI-TARGET HD-MAX

Reviews:

Related manuals for HI-TARGET HD-MAX

Brands by name

Popular brands

Hi-Target GPS HI-TARGET HD-MAX, User Manual

Search results

Summary of Contents for HI-TARGET HD-MAX

Reviews:

Related manuals for HI-TARGET HD-MAX

Brands by name

Popular brands